1. The ultra-large lifting distance design of the electric medical bed can meet the needs of various operations.
2. The bed surface of the electric medical bed can be translated, with an intelligent one-key reset function, and the bed body can be automatically reset at any position; it has a built-in waist bridge.
3. The panel of the electric medical bed is made of high-strength composite board, the main material is stainless steel, high-strength cast iron, aluminum alloy.
4. The mattress of the electric medical bed is a memory foam with a stainless steel T-shaped base.
5. Equipped with an electric brake device, the leg plate can be folded down, abducted and detached.
6. Using electro-hydraulic control, easy operation, low noise and stable performance.
7. Equipped with a built-in emergency power supply, the emergency power supply can automatically charge, when the network power supply is cut off, the emergency power supply will automatically start, and the battery can be used intermittently for more than 5 hours.
8. It can penetrate X-rays, and can perform C-arm inspections of all parts of the body during the operation.
9. The length and width of the table surface ≥1960mm×480mm.
10. The extremely high and low height of the table is ≥1100mm×690mm.
11. The front of the platform is tilted backward at a great angle, forward tilt ≥ 30°, backward tilt ≥ 30°.
12. The maximum angle of the table top left and right tilt left ≥ 18 °, right tilt ≥ 18 °.
13. The extremely large angle of the leg plate, the downward fold ≥80°, and the outward fold ≥90°.
14. The extremely large angle of the back panel is folded upward ≥ 30°, and downward fold ≥ 90°.
15. The waist bridge lift ≥110mm.
16. The horizontal and longitudinal movement of the electric medical bed table is ≥340 mm.
17. Power supply voltage, frequency, capacity ~ 220V, 50Hz, 1.0kW.
Post time: Dec-27-2021