(1) The main function is perfect
1. Bed lift function
① The overall lift of the bed (height is 0~20cm, mainly used to facilitate the nursing and treatment of patients by medical staff of different heights; it supports the insertion of the base of some portable medical equipment into the bed; it is convenient for nursing staff to take and place the dirt bucket; It is convenient for after-sales service personnel to maintain and maintain the product)
② The bed body rises and descends forward and backward (the angle is 0~11°, which is mainly used to reduce intracranial pressure and prevent cerebral edema)
③ The bed body rises and falls forward (the angle is 0~11°, which is mainly beneficial to the drainage of the patient’s pulmonary secretions and makes the sputum easier to cough up, commonly used in patients with varicose veins)
2. Sit up and lie down function
The rising angle of the back (0~80°±3°) and the sagging angle of the legs (0~50°±3°) can mainly prevent the compression of the blood vessels by the body weight (in line with the physiological curve of the human body, the muscles and bones are relaxed, which is the most comfortable for the human body). sitting position)
3. Left and right turning function (0~60°±3°, three crawler-type turning versions are supported on the back, waist and legs of the human body respectively, which can not only allow the patient to turn over comfortably from left to right, prevent the formation of bedsores, but also facilitate the treatment of the patient. for a full range of care and scrubs)
(2) Complete auxiliary functions
1. Shampoo device
It consists of a shampoo basin, a hot tub, a dirt tub, a water pump, a pipe and a spray head. With this appliance, the nursing staff can wash the hair of several patients alone.
2. Foot washing device
It is composed of a foot wash bucket with a special inclination angle and a waterproof shutter. The patient can wash their feet every day while sitting on the bed.
3. Weight monitoring device
First, the patient’s excretion volume can be accurately known each time; second, the patient’s weight change can be accurately monitored at any time, thereby providing necessary diagnostic parameters for medical staff.
4. Release monitoring device
The patient’s defecation can be accurately monitored at any time, and the relevant operating systems of the bed and toilet can be activated at the time of use, and procedures such as timing, sitting up (self-setting up angle), alarm, and automatic flushing can be automatically completed. , A good helper for critically ill patients and those with incontinence.
5. Anti-decubitus system
The air mattress is an alternating intermittent air mattress composed of strip airbags arranged at different intervals, which can make the protruding part of the patient’s back intermittently detach from the extrusion of the bed board, increase the air permeability and blood circulation of the skin in the pressure part, thereby preventing the The formation of bedsores.
6. Heater
Divided into two gears, it is convenient to dry the user with warm air when wiping their body, washing their hair, washing their feet, etc. It can also be used for drying of sheets and quilts caused by various reasons after they are soaked.
7. Rehabilitation
① The foot pedal moves back and forth, which can moderately pull the patient’s lower limbs;
② The heating device on the foot can prevent the patient’s foot from freezing in winter and increase the blood circulation of the foot;
③ The vibration device on the foot can dredge the local meridians of the patient, promote blood circulation and remove blood stasis;
④ Stepping on the pedals can enhance the patient’s leg strength and prevent leg muscle atrophy;
⑤ The front lifting and lowering of the bed body and the rear lifting and front lowering device can effectively enhance the blood circulation of the patient;
⑥ The tension device on the edge of the bed, repeatedly pulling the handle can exercise and enhance the strength of the patient’s wrist and arm;
⑦ Put the bed in a sitting-up state, and the patient can continuously increase the strength of the legs by tilting their legs upward;
⑧ When the bed is turned over, the medical staff can massage the whole body or part of the patient alone;
⑨ The special device installed at the back of the bed can moderately pull the patient’s neck and waist;
⑩ The special frame on the top of the bed, under the action of the motor, can make the patient’s limbs perform passive functional exercise through mechanical movement.
8. Different suspension devices
① Oxygen cylinders (bags) needed by patients can be placed;
② The external connection of various diagnosis, treatment and nursing equipment can be reasonably distributed and fixed;
③ It can regulate the storage of patient’s excrement.
9. Bed moving device
Universal mute casters can make the bed move freely indoors and outdoors.
10. Information Transmission System
It can accurately detect, display, and store the patient’s blood pressure, pulse, weight, body temperature and other information regularly and irregularly. In the form of text messages, the situation will be reported to the pre-set family mobile phone and the community hospital where it is diagnosed and treated.
11. Video transmission system
The system implements 24-hour camera monitoring and image-to-port transmission for patients. One is to facilitate the remote guidance of medical staff; the other is to facilitate the remote access of the patient’s relatives to the stored on-site picture data, and to coordinate the on-site escorts to jointly improve the quality of care.
Post time: Jun-07-2022